Monstrum Balrog Adjustable Scope Mount with Integrated Bubble Level

The Monstrum Balrog Picatinny Scope Mount allows for A) adjustable offset positioning of your scope mount and B) adjustable range of downward elevation adjustment for longer distance shots.

To adjust offset positioning of scope mount:

• Loosen the two fastening screws at the base of the scope rings.
• Slide the rings forward to your preferred offset position for optimal eye relief and cheek weld.
• Retighten the fastening screws at the base of the scope rings

To adjust the range of downward elevation adjustment:

• Loosen the two fastening screws at the base of the scope rings.
• Slide the scope rings forward such that the white line at the rear of the scope rings aligns with your preferred MOA of downward angling 10, 20, 30, 40, 50, or 120 MOA.
• At each position, grooves have been machined into the scope base allowing the scope rings to tilt downward at the designated MOA.
• Lift and hold the rear scope ring upward, and retighten the fastening screws.

The Monstrum Balrog Picatinny Scope Mount includes an integrated anti-cant level bubble, allowing you to quickly check for proper alignment of your rifle before each shot. 30 mm in diameter, the rings are built for use with standard 30 mm scope tubes. Includes 1 inch inserts